DSP/EQ Operations
Select DSP Menu
About DSP functions:
The Digital Sound Processor use digital signal processing to allow the creation of simulated audio environments inside your car, without degradation of the sound.
1.Press the [DSP] button. The DSF indicator will flash.
2.Turn the [PRESET] knob either clockwise or counterclockwise to select the DSP menu.
●DSP menus
STADIUM : Large stadium without roof or walls.
HALL | : Large concert hall. |
CLUB | : Club with strong bass. |
CHURCH : Church with a vaulted ceiling.
3.Press the [DSP] button to return to the original mode.
To set DSP effects to ON/OFF
Hold the [DSP] button depressed for 1 second or more.
Each time the [DSP] button is held depressed, the function alternates between ON and OFF.
When the DSP function is ON, the DSF indicator lights.
To adjust EFFECTS
About sound effects:
“Effects” refers to the characteristic reverberations and echoes that occur when sound is bounced off walls or other surfaces. This unit allows the amount of echo or reverberation to be adjusted.
1.Press the [DSP] button. The DSF indicator flashes.
2.Turn the [PRESET] knob either clockwise or counterclockwise to select the desired DSP menu adjust item.
3.Hold the [T] button depressed for 1 second or more.
4.Turn the [VOLUME] knob either clockwise or counterclockwise to adjust the effect.
•The amount of effect added can be adjusted within the range
5.Press the [T] button to return to the DSP menu. The selected DSP menu will appear.
6.Press the [DSP] button to return to the original mode.
Selecting the EQ menu
About the EQ function:
The Equalizer allows correction and modification of the frequency response for selected frequency ranges, thus allowing the creation of your own unique sound.
1.Press the [EQ] button.
2.Turn the [PRESET] knob either clockwise or counterclockwise to select the desired EQ menu.
●EQ menus
IMPACT : Low and high frequencies emphasized.
ACOUSTIC : Medium frequencies (vocals) emphasized.
FLAT | : Original sound. |
3.Press the [EQ] button to return to the original mode.
Setting EQ effects to ON/OFF
Hold the [EQ] button depressed for 1 second or more.
Each time the [EQ] button is held depressed in this way, the function alternates between ON and OFF. When the EQ function is enabled (ON), the G.EQ indicator lights.
ADZ625 19
