9. IN CASE OF DIFFICULTY

General

CD

Tape

Problem

Cause

 

 

Measure

Power does not turn

Fuse is blown.

Replace with a fuse of the same amperage. If

on.

 

the fuse blows again, consult your store of pur-

(No sound is pro-

 

chase.

duced.)

 

 

 

 

 

 

 

 

 

 

Incorrect wiring.

Consult your store of purchase.

 

 

 

 

 

 

 

 

 

No sound output

Power antenna lead is shor-

1. Turn the unit off.

when operating the

ted to ground or excessive

2. Remove all wires attached to the power anten-

unit with amplifiers or

current is required for re-

na lead. Check each wire for a possible short

power antenna at-

mote-on the amplifiers or

to ground using an ohm meter.

tached.

power antenna.

3. Turn the unit back on.

 

 

4. Reconnect each amplifier remote wire to the

 

 

power antenna lead one by one. If the amplifi-

 

 

ers turn off before all wires are attached, use

 

 

an external relay to provide remote-on voltage

 

 

(excessive current required).

 

 

 

 

 

 

 

 

Nothing happens

The microprocessor has

Press the reset button with a thin rod.

when buttons are

malfunctioned due to noise,

 

 

 

 

 

 

 

 

 

pressed.

etc.

 

 

 

 

 

 

 

 

 

Display is not accu-

 

 

Reset button

rate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Compact disc cannot

Another compact disc is al-

Eject the compact disc before loading the new

 

be loaded.

ready loaded.

one.

 

 

 

 

 

Sound skips or is noi-

Compact disc is dirty.

Clean the compact disc with a soft cloth.

 

sy.

 

 

 

 

 

 

 

 

Compact disc is heavily

Replace with a compact disc with no scratches.

 

 

scratched or warped.

 

 

 

 

 

 

Sound is bad directly

Water droplets may form on

Let dry for about 1 hour with the power on.

 

after power is turned

the internal lens when the

 

 

on.

car is parked in a humid

 

 

 

place.

 

 

Sound quality is poor.

Playback head is dirty.

Use a cleaning tape, etc., to clean the head.

 

 

 

 

 

 

[RDM] button is not pres-

When listening to a tape recorded with Dolby

 

 

sed.

NR, press [RDM] button and select B NR.

26 ADZ625

Page 22
Image 22
Clarion ADZ625 owner manual Case of Difficulty, General Tape Problem Cause Measure