Clarion ADZ625 owner manual Basic Operations

7. OPERATIONS

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of
	chapter “3. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switch- ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and dam- age the unit.

The clock is displayed when the ignition key is turned to the ACC (accessory) or IGN (igni- tion-on) position even when the unit power is off. In some cars, the clock may momentarily disappear when the ignition key is turned to the START position. The clock will reappear after the engine has started and the ignition key is released to the IGN (ignition-on) posi- tion.

Turning on/off the power

Notes:

•Be careful about using this unit for a long time with- out running the engine. If you drain the car’s bat- tery too far, you may not be able to start the en- gine and this can reduce the service life of the battery.

•System check

This unit checks what external equipment is con- nected to the CeNET. The first time the ACC/Igni- tion is turned on (initialization), “SYSTEM” and “Push PWR” alternately blink in the display. Press the [FNC] button to start the system check. When complete, press the [FNC] button again to activate the unit then the unit appears CHECKING COM-

PLETE.

Radio mode ➜ CD mode ➜ Tape mode ➜ CD changer mode ➜ MD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Adjusting the volume

Turn the [VOLUME] knob clockwise to increase the volume, or turn the [VOLUME] knob coun- terclockwise to decrease the volume.

∗The volume level is from 0 (minimum) to 33 (maxi- mum).

Switching the display

Press the [DISP] button to select the desired dis- play.

Each time you press the [DISP] button, the dis- play switches in the following order:

Main display

Sub (title) display

Clock(CT) display

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Selecting a mode

1.Press the [FNC] button to change the mode of operation.

2.Each time you press the [FNC] button, the mode of operation changes in the following order:

Main display

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will mo- mentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.

∗When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “NO-TTL” appears in the title dis- play instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Operations Common to Each Mode”.

∗You can adjust the way of scrolling a title. For the details on it, refer to the subsection “Ad- justing the way of scrolling” in the “Operations Common to Each Mode”.

12 ADZ625