AC-Processor III Operations

Dolby Pro Logic II

Dolby Pro Logic II is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is further improved. Dolby Pro Logic II realizes excellent 5.1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs, thereby causing a surround channel to be full-ranged (20 Hz to 20 kHz) and become stereo. Therefore, you can enjoy any stereo sources with dynamic sound of

5.1channel. The Music Mode or Matrix Mode can be selected according to a source to be reproduced.

This product is manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

3.Touch on the right of the display to select the Dolby Pro Logic II mode.

RTN

Dolby PL II

OFF

The mode display is switched as follows:

MUSIC (music mode) ➜ MATRIX (matrix mode) ➜ OFF (PL II off) ➜ MUSIC (music mode)...

*For details on the volume adjustment of the center speaker/sub-woofer, see page 40.

4.Touch RTN.

English

Selecting the PL II menu (Dolby PL II)

Select the MUSIC mode or the MATRIX mode matched the source you are to play as the Dolby Pro Logic II mode.

• The factory default setting is “OFF”.

■MUSIC (music mode)

•This mode is suited for stereo sound sources such as CDs.

•Another adjustment mode that enables more detailed adjustment is also available as the sound field spreads differently depending on the state of the recorded music source. (See page 42)

■MATRIX (matrix mode)

•This mode is suited for sound sources such as AM/FM radio.

■OFF

•The Dolby Pro Logic II mode is not used, and the AC-PROIII mode is used. For details on the AC-PROIII mode, see “Selecting each mode” (cf. page 39).

1.Press the [SOUND] button.

2.Touch Dolby PLII.

OFF

OFF

OFF

POSITION

P. EQ

Dolby PLII RTN

SOUND MENU

2 - ZONE ADF A - MODE

OFF OFF

Selecting the position menu

With POSITION, you can select from 5 types it takes for the sound to arrive from the speaker to your seat position.

Also, the time alignment function allows pinpoint setting of speakers so that the same audio effect can be obtained from each speaker up to all listeners.

In the “Selecting each mode” procedure (cf. page 39), set AC-PROIII to “PRO”.

•The factory default setting for POSITION is “OFF” and for the position basic menu is “FRONT”.

■Position menu

This function is pre-stored with 5 position menus. Select the desired menu to suit your preference.

1.Press the [SOUND] button.

2.Touch POSITION.

OFF

OFF

OFF

POSITION

P. EQ

Dolby PLII RTN

2 - ZONE

SOUND MENU

A - MODE

ADF

OFF OFF

DXZ945MP 17