AC-Processor III Operations

English

3.Touch on the ON/OFF display. The position effect is toggled ON/OFF.

POSITION MODE RTN

FRONT BASIC

OFF

3

BU

 

 

B / U

When the position effect is set to “OFF”, the position setting is not reflected on the music source. This ends the position setting. Press the [SOUND] button to return to the original mode.

4. Touch B/U to select “BASIC”.

POSITION MODE RTN

FRONT BASIC

ON

3

BU

 

 

B / U

Each touch of B/U toggles between “BASIC” and “USER”.

5.Touch on the position basic menu No. to select the position basic menu.

Position basic menu

No.

Display Name

Seat Position

1

FRONT-L

Front left seat

2

FRONT-R

Front right seat

3

FRONT

Front seats

4

REAR

Rear seats

5

FULL SEAT

All seats

6.Press the [SOUND] button to return to the original mode.

Adjusting/storing positions (user memory)

With user memory, pin-point setting of speakers is enabled so that the same audio effect can be obtained from each speaker up to all listeners based upon the position basic menu. Up to 5 adjustment setups can be stored to user memory.

1.Press the [SOUND] button.

2.Touch POSITION.

3.Touch on the ON/OFF display. The position effect is toggled ON/OFF.

4.Touch B/U to select “BASIC” or “USER”.

5.Touch on the right of the display to select the menu that is used as the menu for adjustment.

6.Press the [A] button.

7.Touch on the left of the display to select “T-ALIGN” or “SP GAIN”.

8.Touch on the center of the display to select each adjustment item.

Each touch of switches the adjustment items as follows:

Adjustment items

FRONT L SP (front left speaker)

FRONT R SP (front right speaker)

REAR L SP (rear left speaker)

REAR R SP (rear right speaker)

(when “SP-SETTING” is set to “CTR+SW”)

SUB-WOOFER(sub-woofer)*1

(when “SP-SETTING” is set to “SW + SW ”)

SUB-W L (sub-woofer Lch)*1

SUB-W R (sub-woofer Rch)*2

*1 This is displayed only when “SUB- WOOFER” under “SOUND” in the adjust mode is set to “ON”.

*2 This is displayed only when “SUB- WOOFER” under “SOUND” in the adjust mode is set to “ON”, and “T-ALIGN” is selected at step 7.

T-ALIGN (time alignment):

The distance from the listener up to each speaker can be entered in 2.3 cm steps, and the time that the sound reaches the listener from each speaker can be adjusted.

SP GAIN (speaker gain):

Adjusts the speaker output level. Adjust so that the volumes that are output from each speaker are all the same.

9.Touchon the right of the display and adjust the item as desired.

POSITION EDIT RTN

FRONT L SP 085 . 1cm

T-ALIGN

∗“T-ALIGN” can be adjusted within the range 0 cm to 501.4 cm in 2.3 cm steps.

∗“SP GAIN” can be adjusted within the range -20dB to 0dB.

18 DXZ945MP