Operations Common to Each Mode

English

2.Touch on the setting item display to select “AC-PROIII” under “SOUND” and “EQ SELECT” under “SOUND”.

ADJUST MODE

AC - PRO III PRO

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to select the mode.

Mode selection

AC-PRO III STD

•Standard mode (VSE menu)

PRO

•PRO mode (position menu)

EQ SELECT P.EQ

•Equalizer mode (P.EQ menu)

BAS/TREB

•Bass/treble mode

4.Press the [A] button to return to the original mode.

Setting the speaker configuration (SP-SETTING)

Set to match the speaker configuration of your car to fully bring out the audio characteristics of this unit.

• The factory default setting is “SW + SW”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “SP-SETTING” under “SOUND”.

ADJUST MODE

SP - SETTING SWL +SWR

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to set the speaker configuration.

Speaker configuration

CTR+SW

 

Front/rear speakers (4ch)

5.1ch

 

Center speaker (1ch)

configuration

 

Sub-woofer (1ch)

SW

 

+SW

 

 

Front/rear speakers (4ch)

4ch+sub-woofer

Sub-woofer (2ch)

configuration

 

 

 

 

 

 

 

 

Notes:

•Sound is not output from the center speaker unless the following settings are made when “CTR+SW” is set.

(1)Referring to “Selecting the PLII menu” (cf. page 17), set the Dolby Pro Logic II mode to “MUSIC” or “MATRIX”.

(2)Referring to “Setting speakers ON/OFF” (cf. page 40), set the center speaker to “ON”.

•Sound is not output from the sub-woofer Lch when “SW L +SW R ” is set and the Dolby Pro Logic II mode is set to “MUSIC” or “MATRIX”.

4.Press the [A] button to return to the original mode.

Setting speakers ON/OFF (CENTER-SP/SUB-WOOFER)

Set the center speaker (CENTER-SP) and sub- woofer (SUB-WOOFER) ON/OFF.

Be sure to set this setting to “OFF” when there is no center speaker or sub-woofer.

•The center speaker (CENTER-SP) can be set when the Dolby Pro Logic II mode is set to “MUSIC” or “MATRIX”, and “SP-SETTING” is set to “CTR-SW”.

•The factory default setting is “ON”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “CENTER-SP” under “SOUND” and “SUB-WOOFER” under “SOUND”.

ADJUST MODE

CENTER - SP ON

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [A] button to return to the original mode.

40 DXZ945MP