Clarion DXZ945MP WOOFER), (FRONT HPF/CENTER HPF/ SRD HPF/SUB-WLPF), Adjusting the filter frequencies of speakers, Setting speakers ON/OFF (CENTER-SP/SRD-SP/SUB

English

5.1ch Surround Decoder Operations

●Setting items

Main Item		Sub-item
SOUND	CENTER-SP / SRD-SP / SUB-WOOFER
	• Setting the speaker ON/OFF (cf. page 54)
	FRONT HPF / CENTER HPF / SRD HPF / SUB-W LPF
	•	Adjusting the speaker filter frequency (cf. Page 54)
	SP GAIN
	•	Adjusting the speaker output level (cf. page 41)
DELAY	CENTER-SP /SRD-SP
	•	Adjusting the speaker delay time (cf. page 55)
DOLBY D	D-RANGE
	•	Adjusting the dynamic range (cf. page 55)
PL II CONT	PANORAMA / DIMENSION / CTR WIDTH
	•	Setting the music mode in detail (cf. page 42)

Setting speakers ON/OFF (CENTER-SP/SRD-SP/SUB-WOOFER)

Set the center speaker (CENTER-SP), surround speaker (SRD-SP) and sub-woofer (SUB- WOOFER) ON/OFF.

Be sure to set this setting to “OFF” when there is no center speaker, surround speaker or sub- woofer.

• The factory default setting is “ON”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “CENTER-SP” under “SOUND”, “SRD-SP” under “SOUND”, and “SUB- WOOFER” under “SOUND”.

ADJUST MODE

CENTER - SP ON

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

∗In the case of “SUB-WOOFER”, select one of “ON+”, “ON-” or “OFF”. Normally, select “ON+”. However, when

“ON-” is set, an effect in the low range can be strongly felt.

4.Press the [A] button to return to the original mode.

Adjusting the filter frequencies of speakers(FRONT HPF/CENTER HPF/ SRD HPF/SUB-W LPF)

This function allows you to adjust the filter frequency matched to the speakers you are using.

•A speaker that was turned off in the section “Setting speakers on or off (CENTER-SP/ SRD-SP/SUB-WOOFER)” is not displayed.

•The factory default setting for “FRONT HPF” or “SRD HPF” is “THROUGH” (no filter), and for “CENTER HPF” or “SUB-W LPF” is “120Hz”.

■Filter adjustment

FRONT HPF/CENTER HPF/SRD HPF (high-pass filter adjustment)

This filter cuts bass sound from the front center and surround speakers.

THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz

Set the filter matched to the speaker when small-diameter speakers are used.

THROUGH

Set this when using speakers that can generate bass. THROUGH cannot be set at

CENTER HPF.

SUB-W LPF (sub-woofer low-pass filter adjustment)

This filter cuts treble sound from the sub-woofer.

50Hz ➜ 80Hz ➜ 120Hz

Set the filter frequency to match the sub-woofer.

1.Press the [A] button to set to the adjust mode.

54 DXZ945MP