Operations Common to Each Mode

Spectrum analyzer pattern 2

Spectrum analyzer pattern 3

Spectrum analyzer pattern 4

Message information

MESSAGE

PREV

Welcome to Optimedia

NEXT

SSSCAN

The above 8 indications are displayed for about 10 seconds each.

Entering messages to display in message information (MSGINPUT)

1 type of screen saver is available. For details on how to switch the screen saver display, see “Setting the screen saver” (cf. page 36).

•Up to 30 characters can be entered.

•The factory default setting is “Welcome to Optimedia”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “MSG INPUT” under “DISPLAY”.

ADJUST MODE

MSG INPUT ED I T

DISPLAY

3.Touch EDIT.

The mode changes to the message entry mode.

4.Touch on the center of the display to determine the entry position.

∗To clear the message, touch and hold the center of the display for 2 seconds or longer.

If you perform the operation at step 8 with the message cleared, the message returns to its factory default setting.

5.Touch on the left of the display to select the type of text.

Each touch of switches the type of text. For details, see page 32.

6.Either touch on the right of the display, or turn the [ROTARY] knob to determine the entered characters.

7.Repeat steps 4 to 6 to enter the message.

8.Touch and hold MEMO for 2 seconds or longer.

You will hear a long beep, and the message is stored in memory.

9.Press the [A] button to return to the original mode.

Displaying messages (MESSAGE)

This function allows you to display messages on the display when the power is turned ON/OFF. “Hello” is displayed when the power is turned ON, and “See you” is displayed when power is turned OFF.

• The factory default setting is “ON”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “MESSAGE” under “DISPLAY”.

ADJUST MODE

MESSAGE ON

DISPLAY

3.Either touch on the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [A] button to return to the original mode.

English

DXZ945MP 37