AC-Processor III Operations

P.EQ basic menu

No.

Display name

Speaker Mounting

position

1

SEDAN-1

Front: Front door

 

 

Rear:

Rear parcel

2

SEDAN-2

Front:

Front door

 

 

Rear:

Rear door

3

WAGON-1

Front:

Front door

 

 

Rear:

Luggage (side)

4

WAGON-2

Front:

Front door

 

 

Rear:

Rear door

5

MINI VAN-1

Front:

Front door

 

 

Rear:

Luggage (side)

6

MINI VAN-2

Front:

Front door

 

 

Rear:

Rear door

 

 

 

 

6.Press the [SOUND] button to return to the original mode.

Adjusting/storing P.EQ (user memory)

With user memory, you can compensate the frequency characteristics to suit your car based upon the P.EQ basic menu. Up to 6 adjustment setups can be stored to user memory. For details, see “P.EQ adjustment”.

1.Press the [SOUND] button.

2.Touch P.EQ.

3.Touch on the ON/OFF display. The P.EQ effect is toggled ON/OFF.

4.Touch B/U to select “BASIC” or “USER”.

5.Touch on the right of the display to select the menu that is used as the menu for adjustment.

6.Press the [A] button.

7.Touch on the left of the display to select “FRONT” or “REAR”.

P.EQ EDIT

RTN

BAND1

FRONT

8.Touch on the center of the display to select each adjustment item.

Each touch of switches the adjustment item as follows:

Adjustment items

BAND ➜ FREQ ➜ Q ➜ GAIN ➜ BAND...

9.Touch on the right of the display and adjust the item as desired.

∗“BAND” can be adjusted within the range 1 to 3.

∗“FREQ” can be adjusted within the range 20Hz to 20kHz.

∗Select one of 1, 3, 5, 7, or 20 as “Q”.

∗“GAIN” can be adjusted within the range -12dB to +12dB.

10.Repeat steps 7 to 9 to adjust the desired item.

11.When you have finished adjusting each item, touch RTN.

The display returns to the original screen, and “” is displayed at the BASIC or USER display.

Operation so far completes P.EQ adjustment. To continue to store the adjustment values to the P.EQ user menu, perform the following.

12.Touch and hold RTN for 1 second or longer. The P.EQ menu list is displayed.

13.Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer.

You will hear a long beep, and the values you adjusted up to step 10 are stored to the P.EQ menu.

If you hear a short beep, the adjustment values up to step 10 are discarded. Adjust these values again as required.

14.Touch RTN.

15.Press the [SOUND] button to return to the original mode.

∗To select a stored user memory, touch B/U

to display “USER” and touch on the user memory No.

■P.EQ adjustment

The settings that can be adjusted in the P.EQ menu are as follows. The center frequency, gain and Q curve can be stored to channel/band combinations.

For example, center frequency “250Hz”, gain “ -8dB” and Q curve “3” can be stored to band 1 on the front.

FRONT/REAR (channel selection) Selects the channel (front or rear) to adjust.

BAND (band selection)

Selects the frequency band (1 to 3) to adjust. Set the center frequency (FREQUENCY), gain (GAIN) and Q curve (Q) for each frequency band.

English

DXZ945MP 21