Operations Common to Each Mode

2.Touch on the setting item display to select the desired adjustment item under “PL II CONT”.

The adjustment items are “PANORAMA”, “DIMENSION” and “CTR WIDTH”.

ADJUST MODE

PANORAMA NO

PLII CONT

3.Either touch on the right of the display, or turn the [ROTARY] knob and adjust the item as desired.

∗Select “YES” or “NO” for “PANORAMA”.

∗“DIMENSION” can be adjusted within the range 0 to 6.

∗“CTR WIDTH” can be adjusted within the range 0 to 7.

4.Press the [A] button to return to the original mode.

Displaying the Sirius ID No. (SID DISP)

•This item can be set only when Sirius is connected.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “SID DISP” under “TUNER”.

ADJUST MODE

SID DISP

******

TUNER

 

3.Either touch on the right of the display, or turn the [ROTARY] knob to switch between the display for the upper 6 digits and the lower 6 digits.

4.Press the [A] button to return to the original mode.

AUX function

This system has an external RCA input so you can listen to sounds and music from external devices connected to this unit.

Setting the input level (AUX SENS) of portable audio (AUX mode)

This function allows you to set the input level of optional external devices connected to this unit.

• The factory default setting is “MID”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “AUX SENS” under “SETTING”.

ADJUST MODE

AUX SENS

MID

SETTING

 

3.Either touch on the right of the display, or turn the [ROTARY] knob to set the input level.

∗ Select one of LOW, MID or HIGH.

4.Press the [A] button to return to the original mode.

Performing a system check

This function allows you to perform a system check from the adjust mode when required.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “SYSTEM CHECK” under “SETTING”.

ADJUST MODE

SYSTEM CHECK

START

SETTING

3.Touch and hold START for 1 second or longer.

“System Check” appears on the display.

4.Press the [ROTARY] knob. The system check starts.

When the system check is complete, “Completed” appears on the display.

5.Press the [ROTARY] knob again. The main display for the radio mode appears.

English

DXZ945MP 43