English
CAR LENGTH:
Adjusts the deviation in sound pressure along the length of the car.
1.Press the [SOUND] button.
2.Touch VSE.
3.Touch on the ON/OFF display. The VSE effect is toggled ON/OFF.
4.Touch B/U to select “BASIC” or “USER”.
5.Touch on the right of the display to select the menu that is used as the menu for adjustment.
6.Press the [A] button.
7.Touch on the adjustment item display to select “DIFFUSE”, “CAR WIDTH” or “CAR LENGTH”.
VSE EDIT | RTN |
D I FFUSE 5
P.EQ (Parametric Equalizer) allows you to compensate the entire frequency level range in detail by smooth curve using frequency compensation matched to the type of your car.
In the “Selecting each mode” procedure (cf. page 39), set EQ SELECT to “P.EQ”.
•The factory default setting for P.EQ is “OFF” and for the P.EQ basic menu is
■P.EQ basic menu
6 types of P.EQ basic menu are
1.Press the [SOUND] button.
2.Touch P.EQ.
OFF | OFF | OFF |
POSITION | P. EQ | Dolby PLII RTN |
2 - ZONE | SOUND MENU | A - MODE |
ADF |
OFF OFF
8. Touch | on the right of the display and |
|
|
adjust the item as desired. | 3. Touch | on the ON/OFF display. | |
∗ This item can be adjusted within the range | The P.EQ effect is toggled ON/OFF. | ||
1 to 10. |
|
|
|
9.Repeat steps 7 and 8 to adjust the desired item.
10.When you have finished adjusting each item, touch RTN.
The display returns to the original screen, and “” is displayed at the BASIC or USER display.
Operation so far completes VSE adjustment. To continue to store the adjustment values to the VSE user menu, perform the following.
11.Touch and hold RTN for 1 second or longer. The VSE user menu list is displayed.
12.Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer.
You will hear a long beep, and the values you adjusted up to step 9 are stored to the VSE user menu.
If you hear a short beep, the adjustment values up to step 9 are discarded. Adjust these values again as required.
13.Touch RTN.
14.Press the [SOUND] button to return to the original mode.
∗To select a stored user memory, touch B/U
to display “USER” and touch on the user memory No.
P.EQ MODE | RTN | |
SEDAN - 1 | BASIC |
|
OFF | 2 1 | 6 BU |
|
| B / U |
When the P.EQ effect is set to “OFF”, the P.EQ setting is not reflected on the music source. This ends the P.EQ setting. Press the [SOUND] button to return to the original mode.
4. Touch B/U to select “BASIC”.
P.EQ MODE | RTN | |
SEDAN - 1 | BASIC |
|
ON | 2 1 | 6 BU |
|
| B / U |
Each touch of B/U toggles between “BASIC” and “USER”.
5.Touch on the P.EQ basic menu No. to select the P.EQ basic menu.
20 DXZ945MP