10.Repeat steps 7 to 9 to adjust the desired item.
11.When you have finished adjusting each item, touch RTN.
The display returns to the original screen, and “” is displayed at the BASIC or USER display.
Operation so far completes position adjustment. To continue to store the adjustment values to the position user menu, perform the following.
12.Touch and hold RTN for 1 second or longer. The position menu list is displayed.
13.Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer.
You will hear a long beep, and the values you adjusted up to step 10 are stored to the position user menu.
If you hear a short beep, the adjustment values up to step 10 are discarded. Adjust these values again as required.
14.Touch RTN.
15.Press the [SOUND] button to return to the original mode.
∗To select a stored user memory, touch B/U
to display “USER” and touch of on the user memory No.
Selecting the VSE menuVSE (Virtual Space Enhancer) allows you to compensate the sound pressure balance inside your car so that the same sound effect can be obtained whichever seat you are sitting in as proved in compensation simulations.
In the “Selecting each mode” procedure (cf. page 39), set
•The factory default setting for VSE is “OFF” and for the VSE basic menu is “FLAT”.
■VSE basic menu
Six basic menus are
1.Press the [SOUND] button.
2.Touch VSE.
OFF | OFF | OFF |
VSE | P. EQ | Dolby PLII RTN |
| SOUND MENU |
|
3.Touch on the ON/OFF display. The VSE effect is toggled ON/OFF.
VSE MODE | RTN | |
FLAT | BASIC |
|
OFF | 2 1 | 6 BU |
|
| B / U |
When VSE is set to “OFF”, the VSE setting is not reflected on the music source. This completes the VSE setting. Press the [SOUND] button to return to the original mode.
4. Touch B/U to select “BASIC”.
VSE MODE | RTN | |
FLAT | BASIC |
|
ON | 2 1 | 6 BU |
|
| B / U |
Each touch of B/U toggles between “BASIC” and “USER”.
5.Touch on the VSE basic menu No. to select the desired VSE basic menu.
VSE basic menus
No. | Function Name | Description | |
1 | FLAT | Sound source flat | |
equalizing | |||
|
| ||
2 | BASS BOOST | Bass tones enhanced | |
3 | HIGH BOOST | Mid and treble | |
|
| enhanced | |
4 | IMPACT | Low and treble | |
enhanced | |||
|
| ||
5 | ACOUSTICAL | Mid tones (human | |
|
| voice) enhanced | |
6 | SMOOTH | Produces smooth- | |
sounding tones. | |||
|
|
6.Press the [SOUND] button to return to the original mode.
Adjusting/storing VSE (user memory)User memory settings allow you to compensate the sound pressure distribution to suit your preference based upon the VSE basic menu. Up to six user adjustments can be stored.
DIFFUSE:
Adjusts the deviation in diffused sound pressure.
English
2 - ZONE | ADF | A - MODE | CAR WIDTH: |
OFF | OFF |
|
Adjusts the deviation in sound pressure along the width of the car.
DXZ945MP 19