Clarion DXZ946MP Setting the ADF, Adjusting the Sub-wooferand Center Speaker

Basic Operations

■To stop scrolling

Touchon the title display.

Setting the ADF

•ADF is the abbreviation of Anti Distortion Filter.

The adopted “Liveliness Enhancement Filter” and “Sound Tone Compensation” functions allow well-modulated realistic playback without affecting the characteristics of the original sound tone.

This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.

ADF-1 : Suitable for genuine speakers

ADF-2 : Suitable for separate speakers

ADF-3 : Suitable for co-axial speakers

USER : This setting can be adjusted by the user to his or her individual preference.

OFF : No sound effect

• The factory default setting for “OFF”.

Notes:

•As the volume changes when ADF is switched, switch ADF with the volume and “SW VOLUME” (sub-woofer) and “CTR VOLUME” (center speaker) turned down as far as possible.

•On some speaker systems, sufficient effect sometimes cannot be obtained. If this happens, adjust the ADF parameter or the volume.

•When ADF is set to “USER”, “1”, “2” or “3”, the VSE function and BASS/TREB function under EQ-SELECT are disabled.

1.Press the [SOUND] button.

2.Touch ADF.

OFF	OFF	OFF
POSITION	P. EQ	Dolby PLII RTN
2 - ZONE	SOUND MENU	A - MODE
2 - ZONE	ADF	A - MODE

OFF OFF

3.Touch on the right of the display to select the ADF mode.

RTN

ADF MODE

OFF

When ADF is set to “OFF”, the ADF setting is not reflected on the music source. This ends the ADF setting. Press the [SOUND] button to return to the original mode.

∗Select one of USER, 1, 2, 3, or OFF.

4.To change the details of the ADF setting, press the [A] button.

5.Touch on the adjustment item display to select the desired item.

Each touch of switches the adjustment item display as follows:

●Adjustment item (when USER is selected in step 3)

BASS ➜ TREBLE ➜ COMP ➜ BASS...

●Adjustment item (when 1 to 3 is selected in step 3)

LEVEL ➜ COMP ➜ LEVEL...

6.Touch on the right of the display to adjust the item.

∗“BASS” and “TREBLE” can be adjusted within the range 1 to 13.

∗“LEVEL” can be adjusted within the range -3 to +3.

∗Select either “ON” or “OFF” for “COMP”.

7.Press the [SOUND] button to return to the original mode.

Adjusting the Sub-woofer and Center Speaker

•“SW VOLUME” (sub-woofer) can be adjusted only when “SUB-WOOFER” is set to “ON”.

•“CTR VOLUME” (center speaker) can be adjusted only when the Dolby Pro Logic II mode is set to either “MUSIC” or “MATRIX”, “SP-SETTING” is set to “CTR+SW” and “CENTER-SP” is set to “ON”.

•The factory default setting for SW VOLUME is “0” and for CTR VOLUME is “0”.

1.Press the [SOUND] button.

2.Touch A-MODE.