Operations Common to Each Mode

∗ Select one of OFF (dimming OFF, bright), 1 (slightly dimmed) to 5 (dark).

4.Press the [A] button to return to the original mode.

Adjusting the contrast of the display (CONTRAST)

You can adjust the contrast of the display to match the mounting angle of the unit.

• The factory default setting is “6”.

1.Press the [A] button to set to the adjust mode.

2.Touchon the setting item display to select “CONTRAST” under “APPERNCE”.

ADJUST MODE

CONTRAST 6

APPERNCE

3.Either touchon the right of the display, or turn the [ROTARY] knob to adjust the contrast.

*This setting item can be adjusted within the range 1 to 11.

Adjust this setting item while viewing how the appearance of the display changes.

4.Press the [A] button to return to the original mode.

Making the LED blink when DCP is removed (BLINK LED)

You can make the LED on this unit blink when the DCP is removed.

• The factory default setting is “OFF”.

1.Press the [A] button to set to the adjust mode.

2.Touchon the setting item display to select “BLINK LED” under “APPERNCE”.

ADJUST MODE

BLINK LED OFF APPERNCE

3.Either touchon the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [A] button to return to the original mode.

Setting the beep for when buttons are operated (BEEP)

The short or long high-pitched tone you hear when a button is operated is called a “BEEP”.

• The factory default setting is “ON”.

1.Press the [A] button to set to the adjust mode.

2.Touchon the setting item display to select “BEEP” under “APPERNCE”.

ADJUST MODE

BEEPON

APPERNCE

3.Either touchon the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [A] button to return to the original mode.

Selecting each mode

This item cannot be selected when the Dolby Pro Logic II is set to “MUSIC” or “MATRIX” (cf. page 17).

•The factory default setting is “PRO” for AC- PROIII and “P.EQ” for EQ SELECT.

■AC-PROIII

When “STD” (standard mode) is selected, the sound quality and field can be adjusted by VSE (Virtual Space Enhancer) so that the same audio effect can be obtained whichever seat you are sitting in.

When “PRO” (PRO mode) is selected, the sound quality and field can be adjusted in detail for each seating position.

■EQ SELECT

When “P.EQ” (equalizer mode) is selected, the entire frequency level range can be compensated by a detailed smooth curve.

When “BAS/TREB” (bass/treble mode) is selected, the frequency level can be compensated by dividing it into 2 major levels, bass (low tones) and treble (high tones).

1.Press the [A] button to set to the adjust mode.

English

DXZ946MP 39