TV Operations

MODE

Touching this displays sub-functions. Touching and holding this for 1 second or longer displays the preset memory list.

P-SCAN: This is displayed during a preset scan. Touching this ends the preset scan. A-STORE: This is displayed during an auto- store. Touching this ends the auto-store.

Switching the reception band

1.Touch BAND to switch the reception band. Each touch of BAND switches the reception band.

TV1 ➜ TV2 ➜ TV1...

English

BAND

Touching this switches the reception band.

Touching and holding this for 1 second or longer toggles between the manual tuning mode and the seek tuning mode.

ad(only in the simple operation display) Touching these buttons enables seek tuning or step tuning (in the manual tuning mode).

Touch and holding these buttons enables quick tuning (in manual tuning mode).

■Preset memory list display

This is displayed by touching and holding MODE for 1 second or longer in the main display.

Station name

001 002 003

3ch

5ch

12ch

RTN

 

 

 

TITLE LIST

32ch 80ch 105ch

004 005 006

Preset No.

:

Tuning in progress

RTN :

Touching this returns the display to the main display.

Selecting the TV mode

1.Press the [ROTARY] knob to select the TV mode.

Each press of the [ROTARY] knob switches the mode as follows:

∗The mode of equipment that is not connected is not displayed.

Seek tuning

Seek tuning is a function for automatically tuning stations with good reception.

1.Touch and hold BAND for 1 second or longer while MANU is displayed.

Automatic tuning is possible when MANU disappears.

2.Touch on the channel display. SEEK UP/SEEK DOWN is displayed, and tuning starts. Tuning automatically stops at stations with good reception.

■To cancel tuning

1. Touchon the channel display again.

Manual tuning

There are 2 ways available: quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Touch and hold BAND for 1 second or longer while MANU is not displayed.

Manual tuning is possible when MANU is displayed.

2.Operate the channel display to tune to a channel on which there is a broadcast. There are 2 manual tuning methods: step tuning and quick tuning.

∗Step tuning is a function for switching the

channel 1 step at a time.

Touch on the frequency display.

∗Quick tuning is a function for switching the

channel continuously.

Touchat the channel display. Tuning stops when you take your finger away from the panel.

DXZ946MP 49