Operations Common to Each Mode

Adjusting the filter frequencies of speakers (HPF/SUB-W LPF)

This function allows you to adjust the filter frequency matched to the speakers you are using.

•The filters (HPF/SUB-W LPF) that you can use differ according to the Dolby Pro Logic II mode setting.

Dolby Pro Logic II

Filter

 

mode setting

HPF

SUB-W LPF*1

MUSIC / MATRIX

Not adjustable

Adjustable

OFF

Adjustable

Adjustable

 

 

 

*1 Adjustment is possible only when “SUB-WOOFER” is set to “ON”.

• The factory default setting is “THROUGH”.

■Filter adjustment

●HPF (high-pass filter adjustment)

This filter cuts bass sound from the front and rear speakers.

THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz

Set the filter matched to the speaker when small-diameter speakers are used.

THROUGH

Set this when using speakers that can generate bass.

●SUB-W LPF (sub-woofer low-pass filter adjustment)

This filter cuts treble sound from the sub-woofer.

THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz

Set the filter frequency to match the sub-woofer.

THROUGH

Set this when a low-pass filter built-in powered sub-woofer is used.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “HPF” under “SOUND” and “SUB-W LPF” under “SOUND”.

ADJUST MODE

HPF THROUGH

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to set the frequency.

*Select one of THROUGH, 50Hz, 80Hz, and 120Hz.

4.Press the [A] button to return to the original mode.

Setting internal amplifier useON/OFF (AMP CANCEL)

Set internal amplifier use ON/OFF matched to whether or not an external amplifier is used.

Set AMP CANCEL to “ON” (internal amplifier use OFF) when an external amplifier is connected and the internal amplifier is not used.

•The factory default setting is “OFF” (internal amplifier used).

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “AMP CANCEL” under “SOUND”.

ADJUST MODE

AMP CANCEL

OFF

SOUND

3.Either touch on the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [A] button to return to the original mode.

Adjusting the output level of the speakers (SP GAIN)

Use the test tone function built into this unit to adjust so that the volume that is output from all speakers is the same.

•This item can be set only when the Dolby Pro Logic II mode is set to “MUSIC” or “MATRIX”.

•The factory default setting is “0dB”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “SP GAIN” under “SOUND”.

ADJUST MODE

SP GAIN

EDIT

SOUND

3.Touch EDIT.

The mode changes to the SP GAIN adjustment mode.

English

DXZ946MP 41