Operations Common to Each Mode

English

Setting the sensitivity of the spectrum analyzer(S/A SENS)

This function allows you to adjust the sensitivity (amount of deflection) of the spectrum analyzer. For details on displaying the spectrum analyzer, see “Switching the display” (cf. page 13) or “Setting the screen saver” (cf. page 36).

• The factory default setting is “MID”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “S/A SENS” under “DISPLAY”.

ADJUST MODE

S / A SENS

MID

DISPLAY

4.Press the [A] button to return to the original mode.

Setting the auto-dimmer (DIMMER IN)

This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your car.

Select either “AUTO” (interlocked to the brightness inside your car) or “ILLUMI” (interlocked to the illumination inside your car) as the auto-dimmer setting.

•When the auto-dimmer function is set to “AUTO”, the brightness of the display is dimmed according to the brightness detected by this sensor.

•Set the dimmer setting at DMR LEVEL.

•The factory default setting is “AUTO”.

3.Either touch on the right of the display, or turn the [ROTARY] knob to adjust the sensitivity.

∗Select either LOW (small deflection amount), MID or HIGH (large deflection amount).

4.Press the [A] button to return to the original mode.

Adjusting the display scroll speed (SCROLL)

This feature allows you to slow down the scroll speed when the scroll speed is too fast, making it difficult to view the screen.

• The factory default setting is “SPEED 2”.

1.Press the [A] button to set to the adjust mode.

2.Touch on the setting item display to select “SCROLL” under “DISPLAY”.

1.Press the [A] button to set to the adjust mode.

2.Touchon the setting item display to select “DIMMER IN” under “APPERNCE”.

ADJUST MODE

DIMMER IN AUTO

APPERNCE

3.Either touchon the right of the display, or turn the [ROTARY] knob to select “AUTO” or “ILLUMI”.

4.Press the [A] button to return to the original mode.

Setting the dimmer level (DMR LEVEL)

This function allows you to set how much the displayed is to be dimmed.

• The factory default setting is “3”.

ADJUST MODE

SCROLL SPEED2

DISPLAY

3.Either touch on the right of the display, or turn the [ROTARY] knob to adjust the sensitivity.

*This setting item can be adjusted within the range SPEED 1 to SPEED 7.

Adjust this setting item while viewing how the appearance of the display changes.

1.Press the [A] button to set to the adjust mode.

2.Touchon the setting item display to select “DMR LEVEL” under “APPERNCE”.

ADJUST MODE

DMR LEVEL

3

APPERNCE

3.Either touchon the right of the display, or turn the [ROTARY] knob to set the dimmer level.

38 DXZ946MP