5.1ch Surround Decoder Operations

When the P.EQ effect is set to “OFF”, the P.EQ setting is not reflected on the music source. This ends the P.EQ setting. Press the [SOUND] button to return to the original mode.

4.Touchon the P.EQ menu No. to select the P.EQ menu.

P.EQ MODE

RTN

SP - SEL FRONT

 

ON

 

P.EQ menus

SIGNAL ➜ SP-SEL ➜ BAND ➜ FREQ ➜ Q

➜GAIN ➜ SIGNAL...

5.Touchon the right on the display and adjust the item as desired.

SIGNAL (selects the adjustment signal): Selects “P-NOIS” or “MUSIC”

•P-NOIS: set when pink noise is to be used

•MUSIC: set to use music signals

SP-SEL(selects the speakers whose P.EQ value is to be adjusted):

Select one of “FRONT”, “CENTER” or “SURROUND”.

•FRONT: front speaker

•CENTER: center speaker

•SURROUND: surround speaker BAND (selects the frequency band):

Select one of band 1 to 3 FREQ (selects the center frequency):

The adjustment range is from 20 Hz to 20 kHz.

Q (sets the Q curve):

Sets one of 1, 3, 5, 7, or 20 as the sharpness of the Q curve.

GAIN (adjusts the output level):

Adjusts the gain (output level) within the range -12dB to +12dB. (1dB steps, 25 points)

6.Repeat steps 4 and 5 to adjust the desired item.

7.Press the [SOUND] button to return to the original mode.

■P. EQ adjustment

The settings that can be adjusted in the P.EQ menu are as follows. The center frequency, gain and Q curve can be stored to channel/band combinations.

For example, center frequency “250Hz”, gain “ -8dB” and Q curve “3” can be stored to band 1 on the front.

For details on the P.EQ function, see “P. EQ adjustment” (cf. page 21).

Changing settings

When a 5.1ch surround decoder is connected, settings relating to music in the adjust mode are changed.

Selecting setting items

The following describes the items whose settings are changed.

For details of other items that are not changed, see “Changing settings” (cf. page 34) at “Operations Common to Each Mode”.

1.Press the [A] button.

The mode changes to the adjust mode.

ADJUST MODE

CENTER - SP ON

SOUND

2.Touchon the setting item display to select the item to set.

∗Touchingon the left of the display switches main items 1 item at a time.

Touching on the left of the display switches sub-items continuously.

∗Touchingon the center of the display switches the sub-items 1 item at a

time. Touching switches sub-items continuously.

3.When “THROUGH” is displayed at the right of the display, touch THROUGH to switch to the adjustment details display.

4.Either touchon the right of the display, or turn the [ROTARY] knob to set the details.

English

■To return to the original mode

1. Press the [A] button again.

DXZ946MP 53