Radio Operations

Notes:

•When auto store is performed, stations stored to memory so far are cleared.

•When there are fewer than 6 stations with good reception, low frequencies are automatically returned to, and auto store is performed again. If there are fewer than 6 stations even after auto store is performed twice, stations stored so far remain in memory.

Preset scan

Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked.

1.Touch MODE.

2.Touch P-SCAN.

The MODE display changes to “P-SCAN” and the preset No. in the preset scan operation is displayed in the preset No. display.

*The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received.

When preset scan is performed in an FM broadcast, FM stations are received as follows:

FM1 (1 ➜ 6) ➜ FM2 (1 ➜ 6) ➜ FM3 (1 ➜ 6) ➜ FM1 (1 ➜ 6)...

Instant station recall (ISR)

Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.

•The ISR function cannot be used when the 2- ZONE function is in use.

•The factory default setting is “FM87.9MHz”.

1.Press the [I] button.

“ISR” appears on the display.

■To return to the previous mode

Either press the [I] button again, or press the [ROTARY] knob.

■To store the station to “ISR”

In the radio mode, tune the station to store, and touch and hold the [I] button for 2 seconds or longer.

You will hear a long beep, and the station currently being received is stored to ISR.

English

When preset scan is performed in an AM broadcast, AM stations are received as follows:

AM (1 ➜ 6) ➜ AM (1 ➜ 6) and so forth.

■To cancel preset scan

1.Touch P-SCAN.

The P-SCAN display changes to “MODE”, and the stations that were being received when P-SCAN was touched are received next.

DXZ946MP 25