Operations Common to Each Mode
English
When the power is turned OFF with the clock displayed, the clock remains displayed even if this unit is turned off as long as the car engine is running (ACC is ON).
The clock is displayed in
1.Press the [A] button.
2.Touchon the setting item display to select “CLOCK” under “DISPLAY”.
ADJUST MODE
CLOCK ED I T
DISPLAY
3.Touch EDIT.
The time (“e.g. “PM 2: 20”) currently set on this unit is displayed, and the mode changes to the time setting mode.
ADJUST MODE | RTN | |
10am | 05 |
|
CLOCK |
| S |
|
| SET |
∗If you operate another button while you are setting the time, the time is not adjusted.
4.Touchon the center of the display to set hours.
5.Either touchon the right of the display, or turn the [ROTARY] knob to set minutes.
6.Touch SET.
∗You will hear a long beep, and the time is set.
Notes:
•The clock cannot be adjusted when the power is OFF.
•When the battery has been removed for maintenance or for repair, set the time again.
This function allows you display a screen saver when you have not operated this unit for about 30 seconds.
• The factory default setting is “ON”.
1.Press the [A] button to set to the adjust mode.
2.Touchon the setting item display to select “SCREEN SVR” under “DISPLAY”.
ADJUST MODE
SCREEN SVR | ON |
DISPLAY |
|
3.Either touchon the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”.
4.Press the [A] button to return to the original mode.
■To switch the screen saver display
Touch PREV or NEXT while the screen saver is displayed.
Each touch of these buttons switches the screen saver display.
●Screen savers Screen saver pattern 1
Screen saver pattern 2
7. Press the [A] button to return to the original mode.
Screen saver pattern 3
Spectrum analyzer pattern 1
36 DXZ946MP