English

Basic Operations

 

Adjusting the volume

 

 

Turning the [

 

 

 

 

] knob clockwise in-

 

 

 

 

 

 

 

creases the volume; turning it counterclockwise

 

decreases the volume.

 

“VOLUME 0” to “VOLUME 33” will be displayed depends on the volume level.

∗Factory default setting for volume is “VOLUME 13”.

AUX function

This system has AUX RCA input in the rear panel where you can listen to sounds and music from external devices connected to this unit.

1.Connect the external music player to the AUX RCA input.

2.Enable the AUX function in Adjustment mode. Please refer “Setting AUX function” on page 27 for more details.

3.Press the [SRC] button to select the AUX mode to activate the AUX function.

Note:

Volume can be adjusted through the unit.

Please refer chapter “Common Operations” on page 26 for more operation controls.

Radio Operations

Listening to the radio

1.Press the [SRC] button and select the Radio mode, then the radio will be on.

2.To select a preset band, press the [BND] but-

ton, then select one of the preset bands such as FM1, FM2 or FM3. Every time the [BND] button is pressed, the display will change as:

FM1 FM2

FM3

 

FM1...

3. Press the [

 

 

,

 

] button to tune in the

 

 

 

 

desired station.

 

 

 

∗Initial frequency display is “87.50MHz”.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.

1.Press the [BND] button and select the desired FM band.

∗Press and hold the [BND] button for 1.5 seconds or longer to switch to Auto Seek mode. Make sure “SEEK TUNE” is displayed briefly.

2. Press the [

 

,

 

 

] button to start automatic

 

 

station tuning.

 

 

 

 

 

When the [

 

 

 

] button is pressed, search

 

 

 

 

 

 

will be performing in the direction of higher fre-

quencies. When the [

 

] button is pressed,

 

 

search will be performed in the direction of

lower frequencies.

 

 

DX SEEK

 

 

 

 

 

 

 

 

When the [

 

] button is pressed, search will be

 

 

performing in the direction of higher frequencies.

When the [ ] button is pressed, search will be performed in the direction of lower frequencies.

∗When seek tuning starts, “DX” appears in the display.

10 FB275BT / FB275BTB