English

Common Operations

tomatically with previously connected device dur-

 

Automatic connection

 

This function allows the unit to be connected au-

 

ing power up or entering Telephone mode. The

 

Bluetooth® wireless function in your phone has to

 

be turned on to establish automatic connection.

1. Select “AUTO CONN”.

2. Turn the [ ] knob to select “ON” or “OFF”.

ON : Auto connection enabled. OFF : Auto connection disabled.

Notes:

The factory default setting is “OFF”.

Please enable this feature only if your phone is supported.

Selecting microphone input

1. Select “MIC”.

2. Turn the [] knob to select one of the following:

INTERNAL : Built-in microphone will be used.

EXTERNAL : An external microphone will be used.

Note:

The factory default setting is “INTERNAL”.

System Menu

1. Press and hold [ ] and [ ] buttons simultaneously for 1.5 seconds or longer.

2. Press the [ , ] button to select an item.

“VERSION” “FACT. RST”

3. Press the [] button to exit the menu.

Checking the unit version

2-1. Select “VERSION”.

Restoring to factory default setting

This function allows user to restore the unit to the factory default setting.

2-1. Select “FACT. RST”.

2-2. Push the [] knob. A reset con- firmation is prompted.

2-3.

Turn the [

] knob to select “YES”

 

or “NO”.

 

2-4.

Push the [

] knob to confirm the

 

selection.

 

Notes:

All pairing information and preset memories will be cleared. User will have to manually perform those setting again.

Once reset, system will automatically turn off and re-power on.

Clock time will not be reset with this operation.

The clock time reset is done with the following steps.

1.Turn off the power.

2.Press the [RELEASE] button and remove the DCP.

3.Press the reset button with a thin rod.

30 FB275BT / FB275BTB