Introduction to Bluetooth® Wireless Technology
English
What is pairing?
With a mobile phone featuring Bluetooth® tech- nology, you must ʻpairʼ the main unit with the phone/Bluetooth® audio device before you use it for the first time.
Pairing creates a unique and encrypted link between two Bluetooth® devices and lets them communicate with each other eliminating the need to repeat the pairing process during future use. Bluetooth® devices will not work if the devices have not been paired. This car stereo is able to hold up to 8 devices of pairing information.
What is passkey?
Passkey or PIN is a code that you enter on your mobile phone to pair it with the main unit. This makes your phone/Bluetooth® audio device and the main unit recognizes each other and automatically works together. The default passkey for this unit is ʻ0000ʼ.
Pairing with a mobile phone
1.Enable pairing mode in the car stereo. Please refer “Adding a new device (Pairing mode)” on page 29 for more details.
2.Activate Bluetooth® on your mobile phone. Please check your mobile phone ownerʼs manual for further details.
3.Search for new Bluetooth® device on the mobile phone. The car stereoʼs name is “CLARION_ FB275”.
4.When attempting to connect to the car stereo, the mobile phone will prompt for a passkey, enter the PIN: “0000”.
5.Device name will be displayed for editing after successful pairing. Please refer “Editing a device name” step 3 onwards on page 29 for more details.
6.The display returns to previous mode after a few seconds.
7.Any incoming call will be automatically diverted to the car stereo once connection is estab- lished.
Notes:
Please make sure your mobile phone supports the HFP profile.
Always make sure the Bluetooth® Operation mode in the phone is on when using this car handsfree.
Any further connection attempts by other devices to connect as HFP partner are rejected until the current device is disconnected. Please refer your mobile phone ownerʼs manual for disconnecting device.
Up to the first 8 characters of device name can be supported. If device name is not obtained, Bluetooth® address of the device will be used as default.
Please refer chapter “Handsfree Operations” on page 22 for telephone function.
Pairing with an external Bluetooth® audio player (A2DP support)
1.Enable pairing mode in the car stereo. Please refer “Adding a new device (Pairing mode)” on page 29 for more details.
2.Set the Bluetooth® audio player in Pairing mode. Please check your audio player ownerʼs manual for further details.
3.The display automatically switches to BT Audio mode and start playing music upon success- fully pairing and connection. Connection can be established in any Source mode.
Notes:
Please make sure your Bluetooth® audio player supports the A2DP and AVRCP profiles.
Any further connection attempts by other devices to connect as A2DP/AVRCP partner are rejected until the current device is disconnected.
You do not have to enter a dedicated pin code for pairing these two devices (Only applicable to
Clarion products such as Aux Bluetooth® Transmitter ), as you do with a mobile phone. However, for other A2DP devices, you may need to enter “0000” for the pin code in those devices.
20 FB275BT / FB275BTB