English

11. SPECIFICATIONS

FM tuner

Frequency Range: 87.5 MHz to 107.9 MHz

Usable Sensitivity: 11 dBf

50 dB Quieting Sensitivity: 17 dBf

Alternate Channel Selectivity: 75 dB

Stereo Separation (1 kHz): 35 dB

Frequency Response (±3 dB): 30 Hz to 15 kHz

SD player

System: Multimedia audio system

Frequency Response: 10 Hz to 20 kHz (±3 dB)

Dynamic Range: 80 dB (1 kHz)

Harmonic Distortion: 0.01%

Bluetooth® wireless technology

Compliance: Bluetooth® 1.2

Frequency Range: 2.40~2.4835 GHz, ISM band

RF Power: Class 2 (2.5mW)

Profiles: HFP, A2DP, AVRCP

Operating Temperature: -20ºC ~ 60ºC

Telephone Operation:

Noise reduction, Echo cancellation, Full duplex telephony

Mic Input (External): 2.2k ohm, 2V electret

Audio

Maximum Power Output: 200 W (50 W X 4 ch)

Bass Control Action (100 Hz): ±14 dB

Treble Control Action (10 kHz): ±14 dB

Line Output (with A/C 1 kHz, 10 kΩ): 1.8 V

General

Power Supply Voltage:

12 V DC (10.8 V to 15.6 V allowable), negative ground

Current Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)

Weight: 1.87 lb. (0.85 kg)

Dimensions:

178 mm Width X 50 mm Height X 154 mm Depth

Notes:

Specifications comply with JEITA Standards.

Specifications and design are subject to change without notice for further improvement.

Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier.

If this is not done, severe damage to the source unit may happen.

Power Output:

17 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N

Signal to Noise Ratio:

87 dBA (reference: 1 W into 4Ω)

38 FB275BT / FB275BTB