Introduction to Bluetooth® Wireless Technology

The same device may connect as both A2DP/ AVRCP and HFP partner. This normally happens to mobile phone with wireless music streaming capability. However, using the same device will cause the A2DP/AVRCP to be disconnected when there is an incoming call or making a call. User may need to manually resume playback via audio player in phone depends on the type of phones. However, some phones will automatically resume to BTAudio mode after telephone interrupt.

Please refer chapter “Audio Streaming Operations ” on page 25 for music streaming functional- ity.

Please refer “Bluetooth® adjustment” on page 29 for other Bluetooth® related adjustment.

Disconnecting Bluetooth® device

1. Press and hold the [ ] button for 1.5 seconds or longer to disconnect all Bluetooth® devices.

CLOSING CONNECTIONS” will be displayed and “ ” indicator lights off.

Notes:

Turning off the unit power and deleting any

Bluetooth® device in Adjustment mode will also disconnect the current device.

Alternatively, user can use the phone to manually disconnect the device. However some devices will automatically reconnect once disconnect. Please refer your device owner's manual for more de- tails.

English

Connecting Bluetooth® device

Your device/phone will normally connect automatically to the unit after pairing. However, some phones will not allow automatic connection to the unit after pairing; please use the phone to manually connect to the unit.

If Automatic Connection is enabled in Adjustment mode, the unit will try to connect to the previously connected phone when entering Telephone mode or during power up. Connection can be established at any Source mode. If connection is unsuccessful, automatic connection will stop. Please refer “Automatic connection” on page 30 to enable this feature.

The “ ” indicator will light on upon successful connection.

Notes:

Auto connection only works for HFP. User may need to manually connect for A2DP. This will depends on

the Bluetooth® audio player.

Please connect HFP to unit before audio streaming. It is recommended to use one device at one time as using 2 different devices in the same time may affect the normal operation.

Please refer “Compatible Devices” on page 31 to make sure your device is compatible.

FB275BT / FB275BTB 21