7. OPERATIONS

Note: Be sure to read this chapter referring to the

Basic Operationsfront diagrams of chapter “4. CONTROLS” on page 5.

English

!CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

1.Press the [SRC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last Operation mode and will automatically switch to display that mode.

3.Press and hold the [SRC] button for 1.5 sec- onds or longer to turn off the power for the unit.

∗A welcome animation will be displayed at the first time. This animation can be turned on or off in the Adjustment mode.

Notes:

Be careful about using this unit for a long time without running the engine. If you drain the carʼs battery too much, you may not be able to start the engine and this can reduce the service life of the battery.

The unit will automatically prevent from being turned on the power for a few seconds after power off for internal protection purposes.

Selecting a mode

1.Press the [SRC] button to change the Opera- tion mode.

2.Each time you press the [SRC] button, the Op- eration mode changes in the following order:

Radio mode SD mode

(BT Audio mode) (AUX mode) Radio mode...

∗AUX mode is only available if AUX is enabled in ADJ mode while BT Audio mode will only be available if there is A2DP connection.

And the following title will be displayed for a moment each time the mode changes.

Notes:

There will be screen wipe transition in between if animation is enabled in Adjustment mode.

If the SD mode is selected when no SD memory card is inserted, the display shows “NO CARD”.

Switching the display

Press the [DISP] button to select the desired dis- play.

When the [DISP] button is pressed at the first time, the current display type will be displayed. Further pressing the [DISP] button will switch the display in the following order:

SD mode

“TRACK”“FOLDER”“TITLE”“ALBUM”

“ARTIST”“TRACK” ...

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functionʼs display, then revert back to the preferred display several seconds after the adjustment.

FB275BT / FB275BTB

9