English

9. TROUBLESHOOTING

 

Problem

Cause

Measure

 

Power does not turn on.

Fuse is blown.

Replace with a fuse of the same amperage.

 

(No sound is produced)

 

If the fuse blows again, consult your store of

 

 

 

purchase.

 

 

Incorrect wiring.

Consult your store of purchase.

 

 

 

 

 

No sound output when

Power antenna lead is

1. Turn the unit off.

 

operating the unit with

shorted to ground or

2. Remove all wires attached to the power

 

amplifiers or power

excessive current is

antenna lead. Check each wire for a

 

antenna attached.

required for remote-on

possible short to ground using an ohm

 

 

the amplifiers or power

meter.

 

 

antenna.

 

 

3. Turn the unit back on.

 

 

 

General

 

 

4. Reconnect each amplifier remote wire to

 

 

the power antenna lead one by one. If

 

 

the amplifiers turn off before all wires are

 

 

 

attached, use an external relay to provide

 

 

 

remote-on voltage (excessive current

 

 

 

required).

 

 

 

 

 

Nothing happens when

The microprocessor has

Perform factory restore. Please refer

 

button are pressed.

malfunctioned due to

Restoring to factory default setting” on

 

Display is not accurate.

noise, etc.

page 30 for more details.

 

No sound heard.

The speaker protection

1. Turn down sound volume. Function can

 

 

circuit is operating.

also be restored by turning the power off

 

 

 

and on again. (Speaker volume is reduced

 

 

 

automatically when the speaker protection

 

 

 

circuit operates).

 

 

 

2. If the sound is muted again, consult our

 

 

 

service department.

 

 

 

 

 

 

 

 

 

Problem

Cause

Measure

 

No sound heard.

MP3 files are absent in a

Write MP3 files onto the SD memory card

 

 

SD memory card.

properly.

 

 

Files are not recognized

Use MP3 files encoded properly.

 

 

as an MP3 file.

 

 

Sound is cut or skipped.

MP3 files are not

Use MP3 files encoded properly.

card

Noise is generated or

encoded properly.

 

noise is mixed with

 

 

memory

sound.

 

 

is not readable.

correct.

Format SD memory card as FAT12 or FAT16.

 

SD/MMC memory card

File system format is not

SD

 

 

 

 

Incompatible SD/MMC.

Please make sure your SD/MMC is supported

 

 

 

or consult your nearest Clarion dealer for SD/

 

 

 

MMC compatibility.

 

MP3 files are unable

Those MP3 files may

Use MP3 files encoded properly.

 

to playback, display

be corrupted or do not

 

 

remains pause or

encoded properly.

 

 

loading.

 

 

34 FB275BT / FB275BTB