28 Platinum Sound Processor User Guide

!" Repeat the system check, Steps 1-3. If the microphone function is not restored, reinsert the first cable, and replace the Headpiece.

3. Headpiece

To replace the Headpiece:

!" Turn the Program Switch to the off position.

!" Remove the Headpiece from the cable by holding the cable at its strain relief portion and gently pulling the cable away from the Headpiece.

!" Insert the two-pin plug into the replacement Headpiece. Take care to match the larger pin on the plug to the larger hole of the Headpiece connector.

!" Repeat the system check, Steps 1-3.

NOTE: Be sure the Processor is turned off before removing the Headpiece cable.

Page 33
Image 33
Clarion Platinum Sound Processor manual To replace the Headpiece