10.OPERATIONS
Basic Operations
Note: | Selecting a mode |
Be sure to read this chapter referring to the chapter |
|
| |
“3. CONTROLS” on page 5. |
|
Owner’s English
CAUTION
When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.
When the liquid crystal panel is open
1.Press the [SRC] button to display the Source menu.
*External equipment not connected to this unit is not displayed.
2.Touch the desired mode key.
manual
Turning on and off the power
Note:
•Start the engine before using this unit.
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Start the engine. The illuminations on this unit light up.
Engine ON position
2.Press the [SRC] button. When the liquid crystal panel is not open, press the [P] (OPEN) button to turn on the power. The unit automatically memorizes its last operation mode and will automatically switch to display that mode.
3.To turn off the power, press and hold the [SRC] button for more than 1 second.
When the liquid crystal panel is closed
1.Press the [SRC] button to change the operation mode.
Each time you press the [SRC] button, the operation mode changes in the following order:
TUNER mode ➜ DVD PLAYER mode ➜ (CD CHANGER mode) ➜ (DVD CHANGER mode) ➜ (TV/VTR mode) ➜ VISUAL mode ➜ (iPod mode) ➜ TUNER mode...
*External equipment not connected to this unit will not be selected.
*When
Adjusting the volume
1.Press the [E]/[e] buttons to adjust the volume.
[E]: Increases the volume.
[e]: Decreases the volume.
*The volume level indicated in the display is in a range from 0 (min.) to 33 (max.).
CAUTION
While driving, keep the volume level at which external sounds can be heard.
VRX766VD 23