Basic Operations
Make the following settings when an external device is connected to the Visual terminal.
NAVI :
when a navigation system is connected.
*When the navigation system is connected, use the monitor lock function. Locking the monitor locks the screen size in F.WIDE mode (full wide) and the VTR system to NTSC.
OTHER :
for external devices other than a navigation system.
NONE :
when no external device is connected.
*The factory default setting is “NONE”.
You can set the unit to blink the LED indication when the DCP (Detachable Control Panel) is removed.
The available operation mode is listed in white letters.
screen to perform the system check manually.
The system will be restarted after performing the system check.
When you remove or attach the DCP (Detachable Control Panel), you can set the liquid crystal panel automatically housing or opening.
*The factory default setting is “ON”.
ON :
The liquid crystal panel houses automatically after removing the DCP. And the liquid crystal panel opens automatically after attaching the DCP.
OFF :
Normal operation.
CLOSE :
The liquid crystal panel houses automatically after removing the DCP.
Setting the time of air conditioner operation modeThis setting can be used to adjust the time the panel stays in the horizontal position when in the air conditioner operation mode.
*The factory default setting is 10 seconds.
manual Owner’s English
VRX766VD 29