manual Owner’s English

Basic Operations

Mute

1. When in the TUNER, VISUAL or TV mode,

 

press the [p] button to turn the mute on

70˚

and off.

When in the DVD PLAYER, iPod or changer mode, keep pressing the [p] button more than 1 second to turn the mute on and off.

* When the mute is turned on, “MUTE” appears at the bottom left of the screen.

Opening and turning the liquid crystal panel

WARNING

•To prevent the battery from going dead, operate this unit with the engine running if possible.

•When the liquid crystal panel is operating, be careful not to get your hand or finger caught between the panel and main unit or the instrument panel of the car.

•Do not move the liquid crystal panel by hand.

Standing up the liquid crystal panel

1.Press the [P] (OPEN) button.

The liquid crystal panel comes out and stands up automatically.

The power of this unit will be turned on.

Panel calibration function

The liquid crystal panel’s maximum angle of inclination can be adjusted to match the installation configuration within the automobile.

•Perform this with the panel in its closed position.

1.Keep pressing the [P] (OPEN) button more than 5 seconds.

The electronic beep will be heard.

After the beep sounds twice, the panel will come out and stand up to the maximum angle. After completion of the calibration, the panel will be housed into the unit automatically.

*If the panel does not strike the instrument panel or other parts of the car during calibration, the maximum inclination will be 110°.

*If the panel strikes a car part during calibration within a range of 70° inclination, the maximum downward inclination will be 70°.

Note:

•If the liquid crystal panel stops in the middle of its operation, press the [P] (OPEN) button to house the panel and press the button again to raise it.

The unit will enter the same display mode as the display was in when last turned off.

24 VRX766VD