5.1 ch Surround Decoder Operations

manual Owner’s English

●FILTER

This function is used to select filter frequencies that suit the speakers that are used.

*This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”.

3-1. Touch the []] key of the FILTER item to show the submenu.

3-2. Touch the [[] or []] key of the FRONT HPF, CENTER HPF, SURROUND HPF or SUB WOOFER LPF item to adjust.

[FRONT HPF]:

This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value.

[CENTER HPF]:

This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.

[SURROUND HPF]:

This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value.

[SUB WOOFER LPF]:

This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.

●SPEAKER GAIN

This function sets speaker output level.

*This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”.

3-1. Touch the []] key of the SPEAKER GAIN item to show the submenu.

3-2. Touch the [[] or []] key of the FRONT L,

CENTER, FRONT R, SURROUND R, SURROUND L or SUB WOOFER item to adjust.

Each item is adjustable in the range –10 dB to +10 dB in 1 dB step increments. The default value is “0 dB”.

●DELAY

This function adjusts the timing of the speakers so that they are synchronized with front speaker output.

*This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”.

3-1. Touch the []] key of the DELAY item to show the submenu.

3-2. Touch the [[] or []] key of the CENTER SP or SURROUND SP item to adjust.

[CENTER SP]:

Adjustments are made in the range from 0 ms to 5 ms. The default value is “0 ms”.

[SURROUND SP]:

Adjustments are made in the range from 0 ms to 15 ms. The default value is “0 ms”.

●DRC

This function sets the dynamic range compression.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [MAX], [STD] or [MIN] key of the DRC item to select respective item.

*The default value is “MAX”.

60 VRX766VD