5.1 ch Surround Decoder Operations
This function is available when an optional 5.1 ch Surround Decoder (DVH940) is connected. When the 5.1 ch Surround Decoder is connected through the CeNET cable, the 5.1 ch Surround Decoder Control unit (DVC940, optional) cannot be used.
5.1ch Surround Decoder control functionThis section describes operation procedures of setting functions.
For details on each functions, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder.
*Requires an optional amplifier.
Note:
•The
1.Press the [ADJ] button to display the ADJUST menu.
2. Touch the [AUDIO EXT.] key.
3.Perform setting for the desired item. See the following sections for details.
4.Touch the [Back] key to return to the previous screen.
*In the following sections, only the details regarding settings are described, procedures to select setting items are skipped.
●SPEAKER SEL (speaker selection)
This function determines center speaker, surround speaker and sub woofer connection.
•The factory default setting is “ON”
•The phase of the “SUB WOOFER” is reversed in the
●Dolby PL II CONTROL
*This function is available only when the MUSIC MODE is selected for Dolby PL II. For setup details, see “Selecting the Dolby PL II (Dolby Pro Logic II) type”.
[PANORAMA]:
Touch the [ON] or [OFF] key to select. “OFF” is the default value.
[DIMENSION]:
Touch the [[] or []] key to adjust the level between 0 and 6. The default level is “3”.
[CENTER WIDTH]:
Touch the [[] or []] key to adjust the level between 0 and 7. The default level is “3”.
manual Owner’s English
VRX766VD 59