There are total of 24 preset positions
There are 2 ways available to recall the preset station.
●Using the [R] or [F] button
1.Press the [BAND] button to select the desired band (FM or AM).
2.Press the [R] or [F] button to recall the previous or next stored station.
●Using the Preset List screen 1. Touch the [List] key.
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Touch the [Band] key to select the desired band. (FM or AM)
2.Touch the [List] key.
3.Touch and hold the [AS] key for more than 2 seconds.
A beep sounds and the stations with good reception are stored automatically to the preset channels.
manual Owner’s English
2.Touch the corresponding Preset key to recall the stored station.
*You can select the desired band by touching the [Band] key.
*Touching and holding the desired Preset key for more than 2 seconds will store the current station to the preset memory.
3.Touch the [List] key to return to the previous screen.
Manual memory1.Touch the [Band] key to select the desired band. (FM or AM)
2.Select the desired station with seek tuning, manual tuning, or preset tuning.
3.Touch the [List] key.
4.Touch and hold one of the Preset key for more than 2 seconds to store the current station into the preset memory.
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for desired station in memory.
1.Touch the [List] key.
2.Touch the [PS] key to start preset scan. The unit starts scanning each station for 7 seconds sequentially.
3.When the desired station is tuned in, touch the [PS] key again to continue receiving that station.
Instant station recall (ISR)Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.
●ISR memory
1.Select the station that you wish to store in ISR memory.
2.Keep pressing the [ISR] button more than 2 seconds to store the current station into the ISR memory.
●Recalling a station with ISR
1.In any mode, press the [ISR] button to switch to the TUNER mode and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.
*The [ISR] button is disabled when SUB zone is selected in the
VRX766VD 33