Basic Operations

Adjusting the angle of the liquid crystal panel

The angle of the liquid crystal panel can be adjusted depending on the mounting angle of the unit or light coming into the car.

1.Turn the power on. When the liquid crystal panel is closed, press the [P] (OPEN) button.

2.Press the [ADJ] button, touch the [MONITOR] key, and then touch [C] key to display the following screen:

3.Repeat touching the [0] key to adjust the angle of the liquid crystal panel. Every touching the [0] key tilts the liquid crystal panel forward or backward.

The adjusted angle is stored in memory.

*Adjustment is possible within the range 70° to 110°.

*There are 5 adjustable angle available.

MAX 110˚

70˚

Housing the liquid crystal panel

1.Press the [P] (OPEN) button. The liquid crystal panel is housed automatically.

Note:

When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid crystal panel.

Turning the liquid crystal panel horizontal (Air conditioner operation mode)

When the way the liquid crystal panel is mounted hinders the operation of the air conditioner, the position of the panel can be turned horizontal temporarily.

1.Keep pressing the [P] (OPEN) button more than 2 seconds when the liquid crystal panel is open.

A beep sounds and the liquid crystal panel turns horizontal.

*Press the [P] (OPEN) button again for the panel to return to the original position.

*The unit can be set so that the panel returns to the original position after a set time in the horizontal position (See page 29).

Adjusting the AUDIO

Note:

When the optional 5.1 ch Surround Decoder (DVH940) is used, the following tone adjustments cannot be made. To adjust the tone, refer to the section “5.1 ch Surround Decoder Operations”.

1.Press the [ADJ] button, then touch the [AUDIO] key.

2.Touch the item key to adjust.

3.Perform the adjustment.

See the following sections for detail.

4.Touch the [Back] key to return to the previous screen.

*In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.

manual Owner’s English

VRX766VD 25