Basic Operations

English

Adjusting the bass(Gain, Frequency, Q-curve)

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

∗This adjustment can only be performed when the Z-Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turn the [ROTARY] knob to adjust the bass.

∗The factory default setting is “BÅGAIN 0Γ. (Adjustment range: -6 to +6)

3.Press the [a]/[d] button to select “BÅF 60Γ.

Turn the [ROTARY] knob to select the frequency.

∗The factory default setting is “BÅF 60Γ. (Adjustment 60/100/200 Hz)

4.Press the [a]/[d] button to select “BÅQ 1Γ.

Turn the [ROTARY] knob to select the Q- curve.

∗The factory default setting is “BÅQ 1Γ. (Adjustment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble (Gain, Frequency)

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

∗This adjustment can only be performed when the Z-Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turn the [ROTARY] knob to adjust the treble.

∗The factory default setting is “TÅGAIN 0Γ. (Adjustment range: -6 to +6)

3.Press the [a]/[d] button to select “TÅF 15kΓ.

Turn the [ROTARY] knob to select the frequency.

∗The factory default setting is “TÅF 15kΓ. (Adjustment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

1.Press the [A-M] button and select “BAL 0”.

2.Turn the [ROTARY] knob to adjust the balance of the left and right speakers.

∗The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

1.Press the [A-M] button and select “FAD 0”.

2.Turn the [ROTARY] knob to adjust the balance of the front and rear speakers.

∗The factory default setting is “FAD 0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

∗The factory default setting is “OFF”.

1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” appears in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-B EX” goes off from the display.

16 VXZ758R