Changing Initial Settings such as Menu Language, etc.

English

Setting the speaker gain

∗If you select “OFF” for this function, you cannot adjust the speaker gain.

∗This function appears only when there is no disc loaded or playback stops.

∗The factory default setting is “OFF”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “SP-GAIN SET” from “AUDIO SETUP”, and press the “” button to go to the option list.

2.Press “” or “” buttons to select “ON” or “OFF”.

3.Press the [ENT] button.

Adjusting the speaker gain

∗This function cannot be operated when the disc is loaded or when “SP-GAIN SET” is set to “OFF”.

∗You cannot adjust the speaker gain for speakers set to “OFF” in “SP-SEL”.

∗The factory default setting is “0 dB”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “SP-GAIN” from “AUDIO SETUP”.

2.Press the [ENT] button to display the SP- GAIN screen.

3.Press “” or “” buttons to select the speaker.

Each time you press the buttons, you can switch among speakers.

FRONT L

CENTER

FRONT R

SRD L

SRD R

SUB-WOOFER

The test tone is output from the speaker you select.

4.Press “” button to go to the right pane.

5.Press “” or “” buttons to adjust the speaker gain. The gain level ranges from “- 6dB” to “+6dB”.

6.Press the “” button to go back to the left pane.

7.Repeat steps 3 to 5 to adjust the each speaker gain.

Note:

•The test tone will not be output when DVD or CD is being played with mute ON.

In that case, press the [MUTE] button on the remote control unit to cancel the mute, or adjust the volume.

Adjusting the speaker delay time

The time necessary for sound to travel from speakers to a listener differs depending on the speaker location or the car size. By adjusting the delay time of each speaker, you can hear the sound from the front speakers and the other speakers simultaneously.

42 VXZ758R