Common Operations

English

Selecting AUX/TEL

You can listen to sounds and music from external devices or your telephone calls from the speakers when connected to this unit.

When TEL INT or External device is connected to this unit, you can select TEL mode or AUX mode.

∗The factory default setting is “AUX”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “AUX/ TEL”.

3.Turn the [ROTARY] knob to select “AUX” or “TEL”.

● AUX :

AUX/TEL input cable is for external Audio in- put.

●TEL :

AUX/TEL input cable is for cellular phone audio input.

4.Press the [ADJ] button to return to the previ- ous mode.

Adjusting the auxiliary input sensitivity

Adjust the auxiliary sensitivity when the audio from an external device is difficult to hear even after adjusting the volume.

●RIGHT:

Telephone calls can be heard on the front right speaker connected to this unit.

●LEFT:

Telephone calls can be heard on the front left speaker connected to this unit.

4.Press the [ADJ] button to return to the previ- ous mode.

Cellular phone interrupt setting

If you connect this unit and your cellular phone with a separately sold unit (TEL-002), you can listen to your telephone calls on your car speak- ers.

∗The factory default setting is “OFF”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “TEL-SWITCH”.

3.Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

OFF ➜ ON ➜ MUTE ➜ OFF...

●OFF:

This unit continues normal operation even when the cellular phone is used.

∗The factory default setting is “MID”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “AUX SENSE”.

3.Turn the [ROTARY] knob to select from “LOW”, “MID” or “HIGH”.

4.Press the [ADJ] button to return to the previ- ous mode.

Setting the car speaker output for the cellular phone (Optional TEL-002)

∗The factory default setting is “RIGHT”.

∗To output the telephone calls, set the cellular phone interrupt to “ON”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “TEL- SP”.

3.Turn the [ROTARY] knob to select “RIGHT” or “LEFT”.

Note:

•If connecting a hands-free kit, please ensure the setting is “ON” to receive the telephone audio through the system.

●ON:

You can listen to your telephone calls from the speakers connected to this unit.

∗When listening to your calls on your car speak- ers, you can adjust the volume by turning the [ROTARY] knob.

●MUTE:

The sound from this unit is muted during telephone calls.

4.Press the [ADJ] button to return to the previ- ous mode.

Performing a system check

This function verifies the devices hooked up through CeNET.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “SYSTM CHK E”.

46 VXZ758R