Common Operations

8.Press and hold the [ ] button for 2 seconds or longer to store the message in memory and re- turn to the display adjust mode.

∗Press and hold the [BND] button for 1 second

or longer to delete the message. Then press

and hold the [ ] button for 2 seconds or longer to return the message to the default set- ting.

9.Press the [DISP] button to return to the previ- ous mode.

Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA TITLE.

∗The factory default setting is “ON”.

1.Press and hold the [DISP] button for 1 second or longer to switch to the display adjust mode.

2.Press the [a]/[d] button to select “AUTO SCROL”.

3.Turn the [ROTARY] knob to select “ON” or “OFF”.

● ON:

Scrolls automatically.

●OFF:

Scrolls just 1 time when the title was changed or you press and hold the [TITLE] button for 1 second or longer.

4.Press the [DISP] button to return to the previ- ous mode.

Dimmer control

You can set the dimmer control.

∗The factory default setting is “ON”.

1.Press and hold the [DISP] button for 1 second or longer to switch to the display adjust mode.

2.Press the [a]/[d] button to select “DIMMER”.

3.Turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [DISP] button to return to the previ- ous mode.

Adjusting the display contrast

You can adjust the display contrast to match the angle of installation of the unit.

∗The factory default setting is “5”. (Adjustment level: 1 to 16)

1.Press and hold the [DISP] button for 1 second or longer to switch to the display adjust mode.

2.Press the [a]/[d] button to select “CONTRAST”.

3.Turn the [ROTARY] knob to adjust the con- trast.

4.Press the [DISP] button to return to the previ- ous mode.

Adjust ModeSetting the low pass filter

∗This function can only be adjusted when the subwoofer output is set to “ON” and the speaker system is set to “5.1ch”. For details on how to set the subwoofer, refer to the subsection “Turning on/off speakers” in the section “Changing Initial Settings such as Menu Language, etc.”.

∗This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

∗The factory default setting is “THROUGH”. If the speaker system is set to “5.1ch”, the factory default setting is “50Hz”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “SUB-W LPF”.

3.Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz

4.Press the [ADJ] button to return to the previ- ous mode.

Setting the amplifier bypass circuit

∗The factory default setting is “OFF”.

1.Press the [ADJ] button to switch to the adjust mode.

2.Press the [a]/[d] button to select “AMP CANCEL”.

3.Turn the [ROTARY] knob to select “ON” or “OFF”.

● ON:

Uses with connected AMP.

●OFF:

Uses with inside AMP.

4.Press the [ADJ] button to return to the previ- ous mode.

English

VXZ758R 45