Digital Radio / DAB Operations
Recalling a preset programme Notes:1. Press the [SRC] button to select the DAB mode. | • If a TP station is not received, the main unit stops | |
the search operation. | ||
|
English
2.Press the [BND] button. Each time you press the [BND] button, the display changes in the following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3.Press one of the [DIRECT] buttons to recall a preset programme.
Note:
•Press and hold the [DIRECT] button for 2 seconds or longer to store the programme currently being received. (Manual memory)
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗The factory default setting is “ON”
∗If the reception of the current broadcast station de- teriorates, “SEARCH” appears in the display and the radio searches for the same programme on an- other frequency.
∗For details on “AF function”, refer to the section “RDS operation” of each owner’s manual.
●Switching OFF the AF function
●Switching ON the AF function
●AF function between RDS and DAB
When the same programme is broadcast by both RDS and DAB, and this function is ON, the main unit switches to receiving the broadcast with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) automatic tuning is also possible.
∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB or RDS broadcast station being received has traffic announcement programmes.
∗For details on “TA”, refer to the section “RDS op- eration” of each owner’s manual.
●Setting the TA standby mode
●Cancelling the TA standby mode
●Searching for a TP station
•“TP” may be lit in the display when a TP broadcast is transmitted from an RDS station. In this case, press the [TA] button to perform TP seek tuning. Press the [TA] button again to return to the previ- ous mode.
INFO (Announcement)In the INFO standby mode, when the selected announcement programme starts, the main unit switches to the selected announcement programme automatically.
●Setting the INFO standby mode
If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and the main unit is set into the INFO standby mode until the selected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold the [TA] button for 1 second or longer while the selected announcement broadcast is being received, the selected announcement broadcast reception is cancelled and the main unit goes into the INFO standby mode.
●Cancelling INFO standby mode
To cancel the INFO standby mode, press and hold the [TA] button for 1 second or longer or press the [SRC] button.
●Information select
This is a function for selecting INFORMATION ON or OFF in the Information interrupt mode. You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH | Contents |
Travel | Transport flash |
Warning | Warning / Service |
News | News flash |
Weather | Area weather flash |
Event | Event announcement |
Special | Special event |
|
|
VXZ758R 53