Digital Radio / DAB Operations

English

1.Perform the following operation depending on the connected model.

Press and hold the [ADJ] button for 1 sec- ond or longer to switch to the RDS mode.

2.Press the [a]/[d] button to select “INFO

SEL E”, then press the [

 

 

 

] button to en-

 

 

ter the INFO select mode.

 

 

 

 

3.Press the [a]/[d] button to select an infor- mation item. You can select any of 6 items:

Travel ➜ Warning ➜ News ➜ Weather ➜ Event ➜ Special ➜ Travel ➜ ...

Switching the PTY and INFO display language

You can select one of 4 languages (English, Ger- man, Swedish or French) for the PTY and INFO shown in the display.

∗The factory default setting is “ENGLISH”.

∗For details on “Switching the PTY display lan- guage”, refer to the section “RDS operation” of each owner’s manual.

4.Turn the [ROTARY] knob to set the informa- tion item for ON or OFF.

5. Press the [

 

] button to store the setting.

6.Press the [ADJ] button to return to the previ- ous display.

PTY

This function enables you to listen to the selected programme type, irrespective of the function mode.

∗One common PTY can be selected for DAB or RDS.

∗Of DAB PTY and RDS PTY, the PTY which is re- ceived earlier takes priority over the other.

∗PTY broadcasts are not yet available in all coun- tries.

∗In the INFO standby mode, INFO stations have pri- ority over PTY stations.

∗In the TA standby mode, TP stations have priority over PTY stations.

∗For details on “PTY”, refer to the section “RDS op- eration” of each owner’s manual.

Volume setting of TA, INFO, emergency broadcast (ALARM) and PTY

The volume for TA, INFO, ALARM and PTY interrupts can be set during TA, INFO, ALARM and PTY interrupt. Perform the following operation depending on the connected model.

∗The factory default setting is “15”.

During a TA, INFO, ALARM or PTY interrupt, turning the [ROTARY] knob to set the volume to a desired level (0 to 33).

∗When the TA, INFO, ALARM or PTY interrupt ends, the volume returns to the level it had before the in- terrupt.

●Setting the PTY standby mode

●Cancelling the PTY standby mode

●Cancelling a PTY interrupt broadcast

●Selecting PTY

●PTY seek

●PTY preset memory

Emergency broadcast

When an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard.

∗For details on “Emergency broadcast”, refer to the section “RDS operation” of each owner’s manual.

●Cancelling an emergency broadcast

54 VXZ758R