English

Changing Initial Settings such as Menu Language, etc.

Setting the down mix

This function allows you to select the method of down-mixing when the channel format and the output channel configuration are not in agreement.

∗This function can be operated only when the speakers other than FRONT-SP are set to “OFF” in “SP-SEL”.

∗The factory default setting is “Lo/Ro”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “DOWN MIX” from “AUDIO SETUP”.

2.Press “” button to go to the right pane.

3.Press “” or “” buttons to select “Lo/Ro” or “Lt/Rt”.

“Lo/Ro”: Down-mixing the discrete 5-channel master etc. to 2-channel stereo track “Lt/Rt”: Writing down matrix-encoded sounds to 2-channel stereo track

4.Press the [ENT] button.

Common Operations

Display Adjust Mode

Turning the screen saver function on or off

This unit features various screen saver patterns that are exhibited across the display. If the screen savers are not desired, they can be turned off.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”.

1.Press and hold the [DISP] button for 1 second or longer to switch to the display adjust mode.

2.Press the [a]/[d] button to select “SCREEN SVR”.

3.Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

OFF ➜ ON ➜ MESSAGE

4.Press the [DISP] button to return to the previ- ous mode.

Entering MESSAGE

INFORMATION

When “MESSAGE” is selected for the screen saver setting, you can change the contents of the message.

∗Up to 30 characters can be entered.

∗The factory default setting is “Welcome to Clarion”.

1.Press and hold the [DISP] button for 1 second or longer to switch to the display adjust mode.

2.Press the [a]/[d] button to select “MSG INPUT E”.

3.Press the [ ] button.

4.Press the [a]/[d] button to move the cursor.

5.Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders:

Capital letters ➜ Small letters ➜ Numbers and Symbols ➜ Umlaut ➜ Capital letters…

6.Turn the [ROTARY] knob to select the desired character.

7.Repeat steps 4 to 6 to enter up to 30 charac- ters for message.

44 VXZ758R