Changing Initial Settings such as Menu Language, etc.

∗This function cannot be operated when CENTER-SP and SRD-SP are set to “OFF” in “SP-SEL”.

∗The factory default setting is “0 ms”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “DELAY” from “AUDIO SETUP”.

2.Press the [ENT] button to display the DELAY screen.

3. Press “” or “” buttons to select the item.

Each time you press the buttons, you can switch between center and surround speakers.

CENTER-SP

SRD-SP

4.Press “” button to go to the right pane.

5.Press “” or “” buttons to adjust the delay time. The delay time ranges from “0 ms” to “5 ms” when you select “CENTER-SP”(1ms step), or “0ms” to “15ms” when you select “SRD-SP” (3ms step).

6.Press the [ENT] button.

Adjusting the dynamic range

This function allows you to adjust the dynamic range, the ratio of the loudest sounds to the quietest sounds.

∗The factory default setting is “MAX”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “DRC” from “AUDIO SETUP”.

2.Press “” button to go to the right pane.

3.Press “” or “” buttons to select the setting. You can select the dynamic range from “MIN”, “STD”, or “MAX”.

4.Press the [ENT] button.

Setting the Dolby Pro Logic Decode processing

You can set whether or not 2-channel source is processed using Dolby Pro Logic Decode.

∗The factory default setting is “ON”.

1.Following the steps 1 to 3 in “Selecting the monitor menu”, select “Dolby PL” from “AUDIO SETUP”.

2.Press “” button to go to the right pane.

3.Press “” or “” buttons to select “ON” or “OFF”.

4.Press the [ENT] button.

English

VXZ758R 43