Installing and Using Your CLS45i
Desktop Use
To use as a desk phone, remove the wall mounting bracket:
1.Remove the handset and turn the phone over so that the bottom is facing you.
2.Push the bracket in and down firmly until you feel it snap out of its mounting slots .
3.Place the base on any desired and suitable location.The small rubber pads on the bot- tom of the phone will help keep the phone in place.
Wall Mounting
The wall mounting bracket is already installed on your CLS45i for your convenience.To attach your phone to the wall:
1.Locate a desired wall phone jack near an AC outlet. Notice the position of the two (upper and lower) protruding nail or screw heads as shown in illustration .These heads fit into the slots on the bottom of the mounting bracket and hold the phone on to the wall. Plug the short phone line cord into the wall jack as shown.
2.Hold the base unit of the phone upright then angle it downwards. Feel for the lower protruding nail or screw head and insert this head into the lower hole on the mounting bracket as shown in .
3.Next, insert the upper phone bracket onto the upper head. Slide the phone down until it is firmly in place on the wall. See .
4.Once the phone is firmly in place on the wall, attach the short line cord to the phone, plug the AC adapter into the phone, and attach the phone’s handset as shown in
.
|
13
