Features – Handset
The following controls and indicators are on the face of the handset.
Keypad. The keypad on the handset is backlit while in use.
TALK button. Press to turn the hand- set ON and OFF. It can be used to answer, place or end a call.
CALLER ID button. Press to dial the Caller ID position selected by the up/down button.
LCD Display. Displays Caller ID and telephone status information. It stores up to 50 telephone numbers and has three language selections.
Earpiece. Antenna.
IN USE / NEW CALL indicator. Lights up when the telephone is in use. It also flashes when there are new calls that have not been reviewed.
DELETE / BACK button. This button is used:
a.to delete Caller ID entries
b.to backspace and delete characters when entering a new name and number into memory
FLASH / EXIT button. Press to:
a.access telephone company subscription services, such as Call Waiting (if available)
b.exit any menu and return to the Standby screen
REDIAL / FWD button. This button is used:
a.To redial last number dialed: Press
to redial the last number that you dialed up to a maximum of 32 digits. It must be the first button pressed the next time you activate the handset, either by picking it up from the cradle or, if out of
the cradle, by pressing TALK.
b.To insert pauses into numbers: When storing numbers into memory, press REDIAL to insert pauses when necessary, such as when entering a sequence of numbers (calling card or credit card number).You may also be asked to provide information for identifi- cation or validation purposes when mak- ing telephone transactions, such as with a bank or other merchant. In these cases you would be prompted at each succes- sive step to provide data such as the last
c.To advance the cursor to the next character location: In storing names into memory, (such as “BEN”), once you have selected “B” on the “2” key, press REDIAL to move the cursor to the right where you will enter the “e” on the “3” key. Continue pressing REDIAL to advance the cursor until all the letters of the name have been selected. Press PROG to store the number.
UP / DOWN arrows. Press to scroll through the Caller ID and SETUP dis-
play.
INTERCOM / ENTER button. Press to:
a.activate the Intercom function
b.store or confirm any selection during SETUP or when entering names/num- bers into memory
MEM button. The MEM button is used when storing and accessing frequently dialed and emergency telephone numbers
5
