Installing and Using Your CLS45i
Press INTERCOM to confirm.When the area code is confirmed, the entered dig- its move to the far left and change from flashing to steady On.
Press UP (s) or DOWN (t) to go to the next menu.
To set up your CLS45i again, press CHANNEL and hold it down for three seconds in the Standby mode.You will again enter the SETUP mode.
Your CLS45i stays in the SETUP mode until
(a)you complete the SETUP steps, or (b) you press FLASH/EXIT, or (c) you let 30 seconds elapse without pressing any keys. However, Caller ID information will still be recorded and can be reviewed once SETUP is complete.
PLACING CALLS FROM THE BASE WITH THE HANDSET EITHER IN OR OUT OF THE CRADLE (USING THE BASE AS A SPEAKERPHONE)
1.Press SPEAKER
2.The SPEAKER button lights up
3.Listen for the dial tone
4.Dial the telephone number
5.When you have finished the call, press
SPEAKER.
6.The SPEAKER light goes out
7P S 8 V 9W Z
* | 0 | # | FLASH |
| |||
|
|
| |
SPEAKER VOL | MUTE | SPEAKER | REDIAL |
|
Placing Calls
You can place calls from either the handset or the base. NOTE: Remember, you must charge the handset battery for
PLACING CALLS FROM THE HANDSET
1.Press TALK or SPEAKER to talk and listen through the handset.The In Use indicator lights up; or,
2.Press the SPEAKER to use the handset as a speakerphone (you can talk and listen through the speaker on the back of the handset)
3.The SPEAKER button lights up
4.The In Use indicator lights up
5.Listen for the dial tone.
6.Dial the telephone number
7.When you have finished the call, press SPEAKER or TALK to hang up.The In Use indicator light goes out.
“Temporary” Tone Dialing Mode
If you have set your phone to the Pulse dial- ing mode and wish to place a call in the Tone dialing mode, you can do that without changing your settings. Simply press “ * ” once to enter Tone temporarily. Any numeric key pressed after “ * ” will be dialed in Tone mode. You can also REDIAL in Tone.
Tone mode will be active until you hang up at which point the phone will automatically reset to the Pulse dialing mode.
Receiving Calls
When a call comes in, you can answer from either the handset or the base.
ANSWERING FROM THE HANDSET WHEN IT IS IN ITS CRADLE
You must pick up the handset to answer.
16
