Speed Dial and Memory Functions
Storing Numbers in the Base Memory Buttons
The memory buttons for the base are M1 through M4 and ER5 through ER7.
1.Press PROG.
2.Dial the number to be programmed (up to 16 digits).
3.Press PROG.
4.Press one of the memory buttons (M1 through M4, ER5 through ER7). A beep follows.The number is stored.
Adding Memory Numbers fol- lowed by an Extension or Menu Choices.
NOTE: If you want to save a number that is followed by an extension or menu choice, program as you would a regular number, with one exception: after you enter the main number, press the REDIAL button. Example: if you wanted to store the number 714 555 2232, but needed to reach extension 323, you would press the following keys:
714 555 2232 REDIAL 323.
There are two ways to do this.
Starting with the TALK or SPEAKER Button:
1.In standby mode, press TALK or SPEAKER to open the line.
2.Press MEM and the desired memory key location (0 through 9).The number is dialed automatically.
Starting with MEM Button (the unit must be in standby mode):
1.Press the MEM button once.
2.Press desired memory location key (0 through 9).
3.Press TALK or SPEAKER.The handset opens the line and automatically dials the number.
Memory Dialing on the Base
1.Press the memory key where the number is stored (M1, M2, M3, M4, ER5, ER6, ER7) and the number is dialed automatically.
2.To dial
Changing Stored Numbers on the Base
If you want to replace one of your stored numbers with another, simply program the new number on top of the old number.
For example, if the number you want to replace is stored on M3 on the base, store the new number on the M3 button.
Memory Dialing on the Handset
Reviewing Memory
Information on the
Handset
Unit must be in
1.Press MEM once.The display reads,
“ENTER MEMO NUMBER”.
2.Enter location number (0 - 9) or press
• If the location is not blank, the display
23
