Features – Handset
into memory locations.
SPEAKER button. Pressing this button turns the handset speaker On and Off. It can also be used to answer incoming calls. For best results, after turning this function On and the handset is out of the cradle, place the handset face down or on its side so that the speaker grille is not blocked.
AMPLIFY button. This button turns the extra amplification On and Off. Press it to put the handset amplifer into the On mode for maximum volume boost. In the On position, the button is backlit and the maximum amplification is 40dB.When it is Off, the backlight goes out and the maxi- mum amplification is approximately 18dB.
CHANNEL / SETUP button.
a.This button is used for switching channels when there is interference on the line.There are 40 channels. If there is interference on the line, pressing this button will move to another chan- nel which should bring much improved clarity of reception.
b.Pressing CHANNEL for three (3) seconds will initiate the SETUP mode.You will see this indicated on the LCD display.
Handset Controls, Functions and Features
There are controls on either side of the handset and they are listed below.
Left Side:
RINGER OFF/ON. This switch turns
the handset ringer On and Off.
REMOTE jack. This 3.5 mm jack is for
use with optional remote devices such as an Ameriphone ER Pillow Switch or Air Switch.
VOL slide switch. When AMPLIFY on the handset is Off, this volume control pro- vides amplification from 0 to 18dB. When AMPLIFY is On, the volume control allows you to adjust the amplification up to 40dB.
Right Side:
TONE LO HI. Adjusts the tone to help you better understand incoming voice on the handset.The TONE control provides clarity, especially with similar sounding words. It is only functional when AMPLIFY is on.
AUDIO jack. 3.5mm jack used for connecting other assistive listening devices such as neckloop, cochlear implant or Personal Computer speaker.
Handset
Left Side
VOL slide switch 
DETACHABLE BELT CLIP
REMOTE jack 
RINGER ON/
OFF switch
6
