Classe Audio VSX-80TXV-S Multi-Roomand IR receiver setup, Volt Trigger setup, Other Settings

Other Settings 09

• OFF – No conversion between video formats.

3When you're finished, press RETURN. You return to the Other Setup menu.

Multi-Room and IR receiver setup

• Default setting: Variable / Setting 1

If you’ve made multi-room connections (see Multi-room listening on page 46) you may need to specify your volume setting. Also use this menu to specify your IR receiver type (if necessary).

1Select ‘Multi Room Setup’ from the Other Setup menu.

6. Other Setup			6f. Multi Room Setup
	a.DRC	Setup	Volume Level
	b.Dual	Mono Setup		Variable
	c.LFE	ATT Setup	IR Setting
	d.SR+	Setup		[Setting 1]
	e.Video Conv. Setup		Be careful of loud
	f.Multi Room Setup
	g.12V Trigger Setup		volume when "FIXED"
			is selected.

:Finish

2Select the volume level setting.

•Variable – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.1

•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls.

With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.

3Select the type of IR receiver you’re using.

•Setting 1 – Use this setting for all (other) IR receivers.2

•Setting 2 – Use this setting if the IR receiver you’re using doesn’t seem to work after selecting Setting 1.

4When you're finished, press RETURN.

You return to the Other Setup menu.

12 Volt Trigger setup

• Default setting: OFF (all components)

After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 48), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below.

1Select ‘12V Trigger Setup’ from the Other Setup menu.

6. Other Setup			6g. 12V Trigger Setup
	a.DRC	Setup	DVD / LD	[		]
					OFF
	b.Dual	Mono Setup	TV / SAT	[	OFF	]
	c.LFE	ATT Setup	DVR1	[ OFF ]
	d.SR+	Setup	DVR2	[ OFF ]
	e.Video Conv. Setup		VIDEO	[ OFF ]
	f.Multi Room Setup		TUNER	[ OFF ]
			CD-R	[ OFF ]
	g.12V Trigger Setup
			CD	[ OFF ]
			XM	[ OFF ]

:Finish

2Select an input function and choose the setting that you want.

This should be the input function, that when selected, switches on the 12 volt trigger.

6g. 12V Trigger Setup

DVD / LD	[ ON	]
TV / SAT	[ OFF	]
DVR1	[ OFF ]
DVR2	[ OFF ]
VIDEO	[ OFF ]
TUNER	[ OFF ]
CD-R	[ OFF ]
CD	[ OFF ]
XM	[ OFF ]
		:Finish

•OFF – 12 volt trigger is not activated for the selected component.

•ON – 12 volt trigger is activated for the selected component.

3Repeat for as many input functions as you would like to set.

4When you're finished, press RETURN.

You return to the Other Setup menu.

Note

1If you selected MR & S in the Surround back speaker setting on page 33, you won’t be able to change the volume level.

2Some IR receivers may not work with this receiver. Check with your audio dealer for more information.

53

En