ClearOne comm 600/900 Auxiliary Devices, Connecting video codecs, amplifiers and sound cards

18 Connecting the RAV— Auxiliary Devices

Auxiliary Devices

The mixer allows connection to a number of different audio and video peripherals, such as video codecs, VCRs, cameras and computers.

Connecting video codecs, amplifiers and sound cards

Line input/output devices such as video codecs, amplifiers and sound cards can be connected to the Line In or Line Out connectors on the RAV mixer. These connectors provide mono-audio.

To connect to a video codec

1.Using an RCA cable, connect the Line In on the RAV mixer to the line out on a video codec.

2.Using an RCA cable, connect the Line Out on the RAV mixer to the line in on a video codec.

LINE

IN

OUT

Figure 2.11. Connecting a Line In/Out device

Connecting the RAV— Auxiliary Devices 19

To connect to a sound card

1.Using an RCA cable, connect the Line In on the RAV mixer to the line out on a sound card.

2.Using an RCA cable, connect the Line Out on the RAV mixer to the line in on a sound card.

LINE

IN

OUT

Figure 2.12. Connecting a sound card

To connect to amplifier

•Using an RCA cable, connect the Line Out on the RAV mixer to the line in on an amplifier.

LINE

IN

ROUT

Figure 2.13. Connecting an amplifier

Note: Use RAV-Ware to adjust the equalization and volume of these devices. Refer to pages 38–42 for more information. When using RAV-Ware, be sure to drag the amplifier to the cor- rect device (either line out or record). This will properly assign the reference and change the volume command on the controller to control the external amplifier volume.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760